阶梯式护坡塑料模具制作说明
阶梯式护坡塑料模具
阶梯式护坡塑料模具是从各地区逐渐认可此类护坡预制块开始的,因为过去使用的护坡砖大多采用六棱块、连锁砖等,小型预制块生产简单,但是难以满足生态护坡的要求,所以阶梯式护坡塑料模具登上了护坡历史的舞台。当前对于此类预制块的需求集中在湖北、内蒙古、河南、山东、广东等地区,呈现逐渐扩大的趋势,而且每种模具使用的材质不同,根据工程要求的工期以及具体施工单位选择不同。所以除了开发钢模具外,还有阶梯式护坡塑料模具,但是钢模具的使用以及周转次数都要好与塑料模具。阶梯式护坡模具的简介是为了更好的表达对于此类模具的制作需求,因为生产的阶梯式护坡预制块所需要的混凝土方量、钢筋重量、人工费等各地区都不同,所以生产成本不一样。
阶梯式护坡塑料模具 阶梯式护坡模具 阶梯式护坡钢模具
The stepped slope protection plastic mold started from the gradual recognition of this kind of slope protection precast block in various regions. Because most of the slope protection bricks used in the past were hexagonal blocks, chain bricks, etc., the production of small prefabricated blocks was simple, but it was difficult to meet the requirements of ecological slope protection, so the stepped slope protection plastic mold stepped on the stage of slope protection history. At present, the demand for such prefabricated blocks is concentrated in Hubei, Inner Mongolia, Henan, Shandong, Guangdong and other regions, showing a trend of gradual expansion, and the materials used for each mold are different, according to the construction period required by the project and the specific construction unit selection. So in addition to the development of steel mold, there are ladder slope plastic mold, but the use of steel mold and turnover times are better than plastic mold. The brief introduction of stepped slope protection mould is to better express the production demand for this kind of mould. Because the concrete volume, reinforcement weight, labor cost and other areas required for the production of stepped slope protection precast block are different, so the production cost is different.